Refractory Metal Weight Calculator
Calculate the theoretical weight of refractory metal bar, plate, tube, wire and disc in seconds. Select a material — molybdenum, TZM, tungsten, tungsten copper, tantalum, niobium, C-103, hafnium, rhenium, zirconium, titanium or nitinol — enter your dimensions in metric or imperial units, and get the weight in kg and lb instantly. All results are theoretical weights based on nominal densities; actual weight may vary with tolerances and material certificates (see disclaimer below).
Density Table
The calculator uses the nominal densities below. Where published sources disagree, one value was selected and used consistently across this site; see the notes under the table.
| Material | Grade / composition | Density (g/cm³) | Density (lb/in³) | Source |
|---|---|---|---|---|
| Molybdenum (Mo) | Pure molybdenum | 10.22 | 0.369 | Plansee datasheet, via EFINEA |
| TZM | Mo-0.5Ti-0.08Zr-0.02C | 10.22 | 0.369 | EFINEA (MatWeb, Plansee) |
| Tungsten (W) | Pure tungsten | 19.25 | 0.695 | Element density table (Wikipedia-consistent) |
| Tantalum (Ta) | Pure tantalum | 16.69 | 0.603 | Element density table (Wikipedia-consistent) |
| Niobium (Nb) | Pure niobium | 8.57 | 0.310 | Element density table (Wikipedia-consistent) |
| Tungsten Copper W90/Cu10 | WCu 90/10 | 16.75 | 0.605 | Wikipedia, Copper–tungsten (GB/T 8320) |
| Tungsten Copper W85/Cu15 | WCu 85/15 | 15.90 | 0.574 | Wikipedia, Copper–tungsten (GB/T 8320) |
| Tungsten Copper W80/Cu20 | WCu 80/20 | 15.15 | 0.547 | Wikipedia, Copper–tungsten (GB/T 8320) |
| Tungsten Copper W75/Cu25 | WCu 75/25 | 14.50 | 0.524 | Wikipedia, Copper–tungsten (GB/T 8320) |
| Tungsten Copper W70/Cu30 | WCu 70/30 | 13.80 | 0.499 | Wikipedia, Copper–tungsten (GB/T 8320) |
| Tungsten Copper W50/Cu50 | WCu 50/50 | 11.85 | 0.428 | Wikipedia, Copper–tungsten (GB/T 8320) |
| Ta-2.5W (R05252) | Ta-2.5%W | 16.6 (approx.) | 0.600 | Stanford Advanced Materials (~16.6) |
| Ta-10W (R05255) | Ta-10%W | 16.7 (approx.) | 0.603 | Stanford Advanced Materials (~16.7) |
| C-103 | Nb-10Hf-1Ti | 8.85 | 0.320 | CBMM / Niobium Tech literature, Table I |
| Hafnium (Hf) | Pure hafnium | 13.31 | 0.481 | Element density table (Wikipedia-consistent) |
| Rhenium (Re) | Pure rhenium | 21.02 | 0.759 | Element density table (Wikipedia-consistent) |
| Zirconium (Zr) | Pure zirconium | 6.52 | 0.236 | PubChem periodic table, density |
| Titanium Grade 2 | CP titanium, unalloyed | 4.51 | 0.163 | Royal Society of Chemistry, 4.506 g/cm³ |
| Titanium Grade 5 (Ti-6Al-4V) | Ti-6Al-4V | 4.43 | 0.160 | Kyocera SGS Ti-6Al-4V datasheet |
| Nitinol (NiTi) | Ni-Ti shape memory alloy, ASTM F2063 | 6.45 | 0.233 | Stanford Advanced Materials (~6.45) |
Notes: lb/in³ values are converted from g/cm³ (× 0.0361273), not independent sources. Molybdenum uses 10.22 (Plansee wrought-material datasheet) rather than 10.14 or 10.28 quoted elsewhere; tungsten uses the widely cited standard value 19.25; tantalum uses 16.69. Tungsten copper values are nominal lower-bound reference values; actual density varies with composition and process. Ta-2.5W and Ta-10W densities are approximate values, as suppliers generally quote them only approximately.
Formulas and Worked Example
Weight = cross-sectional area × length × density. All calculations are done internally in metric units and then converted for display.
- Round bar / rod and wire: volume = π × (D/2)² × L
- Plate / sheet: volume = thickness × width × length
- Tube / pipe: volume = π/4 × (OD² − ID²) × L, where ID = OD − 2 × wall thickness
- Disc: volume = π × (D/2)² × thickness
Worked example — tungsten disc, diameter 50 mm, thickness 5 mm. Volume = π × (50/2)² × 5 = 9,817.5 mm³ = 9.817 cm³. Weight = 9.817 × 19.25 = 188.99 g ≈ 0.189 kg (0.417 lb). Try these dimensions in the calculator above to check the result.
Frequently Asked Questions
How accurate is this refractory metal weight calculator?
Results are theoretical weights based on nominal published densities and the exact dimensions you enter. Actual weights vary with manufacturing tolerances, surface finish and material lot. For commercial transactions, actual weight is determined by scale measurement and the material certificate supplied with your order.
What density values does the calculator use?
The calculator uses one unified set of nominal published densities, listed with sources in the density table on this page. Molybdenum uses 10.22 g/cm³ (Plansee datasheet), tungsten 19.25 g/cm³, tantalum 16.69 g/cm³, and tungsten copper ratios use the GB/T 8320 reference values.
How do I calculate the weight of a tungsten copper (WCu) plate?
Select your tungsten copper ratio, choose the plate form, and enter thickness, width and length. Densities differ by ratio: W90/Cu10 16.75, W85/Cu15 15.90, W80/Cu20 15.15, W75/Cu25 14.50, W70/Cu30 13.80 and W50/Cu50 11.85 g/cm³.
Can I use this calculator for wire in grams per meter?
Yes. Select the wire form, enter the wire diameter and length, and the result shows total weight in grams, kilograms and pounds, plus grams per meter (g/m), the unit wire buyers most often need.
How do I get a quote for the calculated size?
Send your material, dimensions and quantity through our contact page and we will reply with price and availability within 24 hours. We confirm specifications before production.
Need a quote for the size you calculated?
Heeger Materials supplies refractory metals in a wide range of materials, forms and custom sizes. Tell us what you need and we will reply with price and availability within 24 hours.
Contact Us for a Quote