Dysprosium Nitride Powder, DyN, CAS 12019-88-4

Dysprosium Nitride (DyN) is a gray powder. HM provides high-quality Dysprosium Nitride (DyN) Powder at a competitive price, which mainly is used in the synthesis of magnetic storage materials, phosphor, special alloys, and other industrial mass production.

• Formula: DyN
• Density：9.930g/cm³
• Molar Weight：176.5067g·mol^-1
• LogP：0.01508
• Water Soluble: Reaction
• CAS: 12019-88-4

Dysprosium Nitride Powder Specifications

Dysprosium Nitride Powder Properties

• Strong magnetic properties
• Good absorption and emission properties
• Good Chemical stability
• Good thermal stability
• Good electrical conductivity

Dysprosium Nitride Powder Production Process

DyO and graphite powder were mixed and well-grounded in an agate mortar. The mixture was then compressed into a disk with a diameter of 4.4 mm, a thickness of 1.6 mm, and a mass of 80 mg. The discs were placed in a molybdenum disk in an electric furnace equipped with a tungsten mesh heater and degassed at 700 k under a vacuum of 1310 pa. For samples with C/Dy greater than 1.5, dysprosium nitride powder was obtained by carbothermal reduction in a stream of pure N gas at 1990-2095 K at a rate of 1 L/min.

                                                   Dy₂O₃+3C+N₂→2DyN+3CO

Dysprosium Nitride Powder Applications

• Synthesis of magnetic storage materials
• Phosphor
• Special alloy

Dysprosium Nitride Powder Storage and Packing

Dysprosium Nitride (DyN) Powder should be kept sealed and stored in a dry and cool place, and make sure the workroom is well-ventilated or exhausted. The vacuum packing is 1kg/bag, 25kg/drum, or as required.